NC-Pro15x

The video camera shall have an RJ-45 connector for connecting to a 1000 Mbps Ethernet network. The camera shall be powered via PoE+ (Type 2) via LAN connector (IEEE802.3at compliant) or via 24 V DC using a compact power adapter (not included - available through Canon). The camera shall use the network for transmitting video to one or more bridging endpoints without the need for USB extenders. The camera shall also use the network for control and monitoring.

The camera shall have a 1.0 in. CMOS image sensor with 13.4 megapixels. The lens shall have a 15x optical zoom, a horizontal field of view of 73°(W) - 5.7° (T), and a focal length of 25.5mm (W) -382.5mm (T). The camera shall utilize motors for pan, tilt, and zoom (PTZ) and output an IP video stream from the camera directly to the bridging endpoint. The camera movement shall be controlled exclusively via the network. The camera output shall have a 16:9 aspect ratio.

The camera shall include a ceiling plate to allow for ceiling and standing mount installations. The camera should have necessary imaging controls to allow for inverted mounting.

The camera shall have an operating/storage temperature range of 0°C - 40°C. The camera shall weigh approx. 4.1 kg (9.04 lb.) (body only) and with dimensions (W x H x D) approx. 200 x 269 x 208 mm (7.87 x 10.59 x 8.19 in.) (excluding protrusions).

The camera shall integrate natively with the QSC Q-SYS Ecosystem for discovery, control, signal routing, firmware management, and bridging.

The camera shall be the QSC Q-SYS NC-Pro15x.